Jackets and coats range

80% cotton / 20% polyester. Contrasting sleeves. Knitted collar, cuffs and hem. Closing by snaps. Contrasting piped pockets. Band of cleanliness collar. Loop of suspension at the neck. Pocket with a way for headphones. Hidden tie for headphones.

100% enzyme-washed combed cotton (Oxford Grey: 90% cotton/10% viscose). Soft-touch fabric. Casual modern style. Contrasting neck tape (Dark Grey for Oxford Grey colourway and Oxford Grey for other colourways). 2 kangaroo pockets. Self fabric cuffs and hem. Contrasting zip and two-tone drawstring hood. Weight: 180g/m².

50% cotton / 50% acrylic (gauge 12). Fitted cut. Double-layered chimney neck and zipped fastening with smoked metal. Cleanliness strip at neck.

100% polyester anti-pilling micropolar jacket in fleece. 2 zipped pockets on the side. Zipped fastening.

100% polyester anti-pilling micropolar warm fleece. Zipped collar.n2 side pockets.

100% polyester micropolar anti-pilling very thick and warm zip jacket. 2 zipped front pockets.n

Polartherm® Top Polartherm® Men's Fleece with Anti-Pilling Finish and 2 Fleece Lined Side Pockets. Elastic cuffs keep hands free and easy to move. It's a working polar to personalize practical and ultra hot.nComposition : fleece fleece Active Fleece by Result® made of 100% Polyester 330 g / m². The inner fleece is made of 100% Polyester with special fibers to ensure that the fabric absorbs at most 1% of its weight in moisture, which evaporates in the air under the effect of the movements.

Custom men's jacket in 100% polyamide. The interior trim is polyester. The warm down jacket is lightweight. Compressible in its storage bag, it is very convenient to carry during trips. The 2 pockets are zipped in front. The interior of the sleeveless jacket is in a contrasting color (except for Navy colors). Weight: 340 g / m².

Exterior: 100% polyamide. Polyester interior trim. Warm and ultra-light. Compressible in its storage bag. 2 zipped front pockets. Contrasting interior (except for Navy colors).
Available in 3 colors: Navy

100% polyamide with polyester inner lining. Hot and ultralight. Compressible in its storage bag and 2 zipped pockets in front. Contrasting interior and hood (except for Navy colors). NGrammage: 340 g / m²

Exterior layer: 300T taffeta 100% polyester with acrylic coating. Inner layer: 100% polyester padded taffeta. Detachable, adjustable padded hood and weatherproof inner strap. 2 zipped front pockets and 1 inner wallet pocket. Wrists and bottom edge in cotton / spandex rib stitch 2x2. SBS tone on tone zip. Contemporary "bomber" style and "retail"" cut with plain exterior color and contrasting inner lining."

Outer: 100% 20D nylon. Lining: 100% 20D nylon. Filling: 100% polyester 220 g/m². Adjustable hood. Showerproof, windproof. Zipped front pockets. Full front zip. Soft elasticised cuff. Fashionable quilted design. Hand-filled. Easy to pack. Weight: 300 gsm.

Outer: 100% polyester with PVC coating - 200 gsm. Inner padding: 100% polyester - 350 gsm. Lining: 100% polyester - 60 gsm. 2 zipped side pockets. 1 inside pocket. Ribbed neck and cuffs. Reflective tape on shoulders and sides. Lined hood. 1 zip at chest and 1 zip at hem for decoration access.

Man's jacket, fashionable, 100% Ottoman Taslan. The inner lining is 100% polyester mesh. The outer fabric is very resistant and matte color. The two-tone jacket has 2 zipped pockets on the front, a zipped pocket on the chest and an inside pocket. 1 inside pocket.The inside of the collar is ribbed with contrasting stripes. The colorful stripes give charm and a lot of originality to this customizable jacket. The bottom of the jacket is also solid color ribbed, there is no color band. On the ribbed cuffs, there are contrasting stripes. A zip for customisation makes your creations easy to add.

Custom jacket embroidered or printed. Warm and weatherproof jacket that can be worn all year round thanks to its removable sleeves. Exterior made of 100% polyester PVC coating. Closure at the front of the zipped coat and button placket. Clamping strap at the bottom of the self-gripping sleeve. The hood is integrated in the collar and is stored thanks to a zipper with elastic cord.

100% polyester with PVC coating.
Polyester fleece lining. Comfortable fabric.
Zip through front.
3 front zipped pockets.
Detachable sleeves.
Adjustable cuffs.
Contrast zip pullers, neck tape and bartacks.
3 inside pockets, including 2 zipped pockets and 1 mobile phone pocket. Concealed hood.
Contrast elasticated drawcord with toggles at hem.
Zip access for decoration.

Outer: 100% polyester - 400 gsm. 100% polyester taslon reinforced inserts with acrylic coating. Polyester 210T inner sleeve lining. 2 in 1 fleece jacket. 2 zipped front pockets and 1 chest pocket with flap and tear release fastening.\nTone on tone yokes on front, back and lower arms. Easy decoration access at the front and back. Polyester lined removable sleeves for added comfort. Elasticated cuffs and hem. Weight: 400 gsm.

The quality pilot Saber jacket is a workwear to personalise. The outer fabric is made of 100% Oxford polyester with PVC coating. The 190T lining is made of 100% taffeta polyester. The jacket is warm thanks to its insulation of 160g / m² and its padding in 100% polyester. The custom windproof jacket is waterproof to 3000 mm. The cut of the jacket is loose but tightened at the waist, it is a trendy cup effect bomber. The zipper on the front of the jacket is highly resistant. All seams are fully heat sealed and waterproof. The main seams are double stitched to add an original side is mode. The inner lining is damasked in rhombuses, this adds a vintage side to the jacket. The lining of the stand-up collar is made of soft microfleece. Elasticated cuffs and waist. Multipockets: deep pockets at the front, semi-removable left chest pocket with Velcro® closure and zipper for access to marking, right chest pocket, inside chest pocket, zipped pocket on the sleeve. Reflective piping make the jacket to customize more visible at night and ensure the safety of the wearer. Removable zippers on all zippers (4 colors of zipper provided).

Exterior: 100% polyester Oxford. Inside: quilted polyesterZipped fastening with hook and loop fastener and invisible pressures. 2 outside zipped pockets. 2 inside pockets. 1 mobile phone pocket. Hood in collar. Lined collar
4XL available on order in colors:
Black

Satin parka with customizable hood made of 100% polyester pongee 230g / m² and interior trim in 100% polyester 135g / m². The interior of the embroidered parka is in bi-material, it is in 180g / m² microfleece on upper body and polyester lining 210T 60g / m² padded on bottom of garment. The outer fabric is satin. The personalized parka has 2 side pockets and 1 zipped chest pocket at the front as well as 2 inside pockets. The inside of the collar is ribbed and the removable hood lined with fleece to increase comfort and warmth. Closure on the front of the zipped parka with double slider and flap to ensure watertightness. Bottom of sleeve with inner cuffs in edge-coast. Fancy two-tone interior band. 1 zip side heart and 1 zip at the bottom of the garment for access customization.

Custom men's parka in 100% polyester PVC coating. The customizable parka is original and very practical. The parka is both a fleece and a raincoat. The inner fleece can be detached from the parka and used alone. Without the fleece, the parka is lighter and less warm. This allows to wear the customizable parka all year round. The seams are heat-sealed and waterproof. The 3-in-1 parka: the inner lining is made of two materials, the body is made of 100% polyester mesh and the sleeves are 100% polyester. The closure on the front is zipped and button placket pressurized. The inside of the collar is in fleece. The parka to personalize with 3 pockets in front zipped with flap. A self-gripping bottom gripper tabs keep the body warm. The hood of the parka is removable and doubled in net with buttons at pressures + stoppers. Inside zip for customization. The fleece jacket is in microfleece 100% polyester. Sleeves lined in 100% polyester to facilitate the passage of arms and zipper with 2 pockets on the sides. Fleece jacket attached to the parka personalized by zip.

Waterproof jacket/windbreaker outer: 100% 190T polyester, with StormDri 2000 coating. Lining: polyester mesh. Sleeve lining: 100% polyester taffeta. Fully taped seams. Black colour inner across both outer colours. Inner bodywarmer: water-resistant. 100% diamond quilted 210T polyester. 140 gsm padding. Lining: 190T polyester taffeta. Stylish fit. 2 front pockets with storm flaps. Inside right chest pocket on outer jacket. Fully integrated hood. Fully zipped. Elasticated easy tear cuff adjusters. Bodywarmer: 2 side pockets, Full length zip fastening. Easy care.

Outer jacket: 100% polyester ripstop. Lining: 100% polyester. 3000 mm waterproof, 3000 gsm/24h breathable. Taped seams. Inner jacket: 100% 2-layer softshell polyester - 280 gsm. Attached to outer jacket with zip system. Outer jacket: full front 2-way zip. Tear release outer double storm flap with studs. 2 side zipped pockets and 1 zipped chest pocket. Elasticised cuff with tear release adjuster. Removable and adjustable lined hood with reflective peak. Adjustable shock cord hem. Tricot lined collar. Softshell inner jacket: full front zip. 2 side pockets and 1 inner pocket. Seamed cuffs.

Outside parka: 100% 170 gsm textured polyester, partial fleece 100% polyester lining with 230 gsm padding. Windbreaker jacket. 1500 mm waterproof with taped seams. 2000 gsm breathable. Quilted Polartherm fleece lined. Heavy duty 2-way zip with interchangeable colour zip pulls. 4 outer zip pockets. 2 inner zipped pockets. D-ring to left chest pocket. Stand-up collar and removable hood. Longer back hem, adjustable hem. Adjustable cuffs with tear release fastening. Storm flap with press studs. Reinforced contrast stitching and retro-reflective details. Hang tag to back neck. Rugged look. Hardwearing. Weight: 170 gsm.

Custom waterproof jacket in 100% breathable polyamide 5000 g / m² / 24h. Waterproof 3000 mm. The seams of the jacket are heat sealed to ensure its quality and ensure the smallest detail waterproof. Zipper on the front of the jacket customizable and for closing the 2 front pockets. An inside pocket to slip your small items. The lining is in contrasting polyester for an original and trendy touch. The hood is lined net to dry quickly and adjustable to fit all heads. A zip of customization is at the bottom and chest. The weight of the personalized waterproof jacket is 225 g / m².

Outer and lining: 100% polyester taffeta with acrylic coating. Diamond quilting. Padding: 100% 4 oz polyester. Showerproof, windproof Corduroy collar. Front zip. Stud closing front storm flap. 2 press stud pockets at the front. Studded rear saddle vents. Inside chest pocket. Weight: 400 gsm.

Outer: 100% nylon with polyacrylic coating. 2x2 diamond stitching. Inner: 100% polyester with 100% fleece lining. Corduroy collar. Heavy front 2-way zip. Sandwich quilted fleece lining. Water repellent, windproof. Stud front external storm flap. 2 press stud pockets at the front and 1 external zipped pocket. Rear studded saddle vents. Weight: 400 gsm.

80% combed cotton/20% polyester. French terry. High collar. Collar, cuffs and bottom hem in 2x2 rib. 2 side pockets. Seams finished with flatlock topstitching. Side panel details. Weight: 280 g/m².

Windbreak 100% nylon Taffeta to customise. Full opening by zipper with slider. cutaway sale with hood integrated in the collar with Velcro® closure. Foldable jacket based on the K-Way® system integrated into the front right pocket with double-slider zipper. Adjustable hem with drawcord on the hem. Weight of 70 g / m².

Custom men's windbreaker in 100% polyester. The hood in the collar has a self-gripping tab. The 2 pockets are zipped on the front. A drawstring at the bottom allows you to adjust the custom windbreaker. Elasticated sleeves keep the habris cold and damp. Foldable in its pocket on the base of the K-WAY® system for easy storage and transport. Zip closure tone on tone. Weight of 70 g / m².

100% nylon. Waterproof 3000 mm and breathable 1000 gsm/24h. Lightweight. Taped seams. Full front contrast zip. Adjustable hem cord. Elasticised cuffs and hood. Side pockets (one zipped). Printed neck label. Hang tag. Matching stow bag. Weight : 75 gsm.

Custom windbreak in 100% polyamide 210 T with acrylic coating. Zip closure with 1 inside pocket + 2 pockets on the front. Elastic cord at the bottom of the garment with stoppers to maintain the windbreaker and keep the body warm. Hood in the collar with elastic cord to adjust it. The inner lining is in 100% polyester heather gray jersey. The wind protection protects from the elements, keeps warm while being very comfortable to wear. Its cut allows to keep a freedom of movements. The inner zip allows to personalize the windbreaker without damaging it.

Custom lined windbreaker in 100% polyamide 210 T with acrylic coating. The closure of the waterproof jacket is a zipper. 2 pockets on the front with contrasting stopping points and 1 inside pocket. The body lining is 100% polyester and 3/4 polytricot and 1/4 mesh. The sleeves lining is in 100% polyester. An elastic drawstring with stoppers at the bottom of the men's windbreaker makes it possible to tighten the jacket on the hips and keep the body warm. The hood fits in the collar. Interior zip opening for customization. Weight of 220 g / m².

100% polyester diamond. Quick drying fabric. Fully lined mesh. Zipped fastening with reflective piping. 2 zipped front pockets. 1 inside pocket. Elasticated sleeve bottom. Drawstring at the bottom of the garment with stoppers. Reflective side stripes. Zip for personalization.
Weight: 100/105 g/m²

100% polyester anti-pilling micropolar vest. 2 side pockets with stitching on lap. Zipped fastening.

Exterior 100% polyester with PVC coating. Bi-material polar interior lining

Sleeveless man down jacket made of 100% polyester ripstop with acrylic coating. The interior trim is polyester and the 210T polyester lining. The cut of the sleeveless jacket is modern and comfortable. The 2 outer pockets are zipped and the inner pocket has a self-gripping band. The zips are contrasting gray and finish gray contrast band front, pockets and bottom of garment. 1 heart zip and 1 zip at the bottom of the custom bodywarmer.

Outer: 100% polyester microfibre. Inner padding: 100% polyester. 100% polyester fleece inner lining. Warm and comfortable. 2 outer pockets with zip and piping. 1 inner pocket with tear release fastening. Matching zips, trims and lining. 1 zip at chest and 1 zip at hem for decoration access.

Outer: 100% polyester Oxford with PVC coating. Polyester padding and lining. Zip through front with studded storm flap.3 flap pockets and 1 zipped pocket. Inside zipped pocket and mobile phone pocket. Elasticated inner drawcord with concealed toggles at armholes. Zip access for decoration.

100% polyamide.
Polyester inner padding.
Warm and ultra-lightweight. Folds up into storage bag. Decorative front zip fastening.
2 front zipped pockets, including one with a fluorescent phone pocket.
Earphone access.
Contrasting lining and hood. Elasticated binding on edges.

Sleeveless softcase jacket bodywarmer type.
The 3 layer laminated fabric is completely breathable and waterproof.
The inner layer is micropolar.
Very stylishn

Softshell jacket, 95% polyester and 5% elastane. 3-layer super breathable laminated fabric. Breathable membrane and micro-fleece inner layer for maximum comfort and warmth. Zip closure, 2 zipped pockets on the front and a zipped pocket on the left sleeve.

3-layer bonded fabric. Outer layer: 93% polyester/7% elastane. Mid layer: TPU membrane. 1000 gsm/24h breathable. 8000 mm waterproof. Inner layer: 100% polyester microfleece. Durable water repellent finish and windproof. Inner storm flap. Decorative front and back yokes. Zip closing front pockets and chest pocket. Detachable, adjustable hood. Weight: 320 g/m².

This high-performance softcase jacket is perfect for your outdoor trips in all weather conditions. With micropolar anti-pilling inside and outside with a microperforated aerated membrane

Men's softshell jacket customisable in 95% polyester and 5% elastane. 3 layer breathable laminated fabric 1000 g / m2 / 24h. Softshell waterproof 5000 mm. Exterior of the jacket is in 95% polyester and 5% elastane. Intermediate jacket with breathable and micro-ventilated membrane. Inner layer in anti-pilling microfleece. Raglan sleeves. Closure on the zipped front. 2 zipped pockets on the front and 1 zipped chest pocket on the right side. Softshell with removable hood with drawstring and hook and loop closure. Velcro tab at the cuffs. Invisible zipper inside the heart for access customization. Weight of 340 g / m².

Outer: 95% polyester/5% elastane. Inner: 100% polyester microfleece. Water-repellent fabric. Fitted style. 2 zipped outer pockets. Contrasting zip fastenings. Drop hem. Overstitching finish on shoulders and sides. Weight: 300 g/m².

Made of 100% cotton canvas. Enzyme wash. Large inner pocket. Lateral slits. Front opening closed by 1 button. This product has undergone special treatment and has a deliberately aged appearance. This artisanal process involves color variations from one product to another and makes each piece unique. 330 g/m²